Designed for semi-preparative to preparative purification, the reliable and versatile VERITY® 1741 UV-VIS Detector is coupled with the power of multiple-wavelength scanning detection for more significant information and data gathering at a lower cost of ownership.
Explicitly designed for semi-preparative and preparative HPLC
With the ability to scan multiple different wavelengths simultaneously, the VERITY 1741 Detector provides the detection specificity required for a wide array of purification applications. The versatile detector offers flow cell pathlengths ranging from 0.05 to 1.3 mm with a compatible flow rate of up to 500 ml/min and a large scanning range of 200-800 nm that lets you quickly evaluate fractions impurities.
Easy to use at a low cost of ownership
The reliable VERITY 1741 Detector features easy-to-replace flow cells and long-life lamps, decreasing the detector’s downtime and saving you money. The detector also offers a built-in counter for monitoring lamp life, helping you avoid purification interruptions. Gilson’s long-standing UV-VIS detector service and parts experience provides you with a lower cost of ownership.
Fully integrated with TRILUTION® LC Software
Gilson’s TRILUTION LC Software for purification fully controls the VERITY 1741 Detector to monitor up to eight different wavelengths to trigger fraction collection and display real-time spectra. The VERITY 1741 Detector is a powerful and versatile addition to our VERITY® preparative HPLC systems that allow safe compound purification.
Specifications
-
Front panel control or computer control via Ethernet and TRILUTION® LC Software
-
Wavelength Range 200–800 nm (256 CCD elements)
-
Wavelength Accuracy/Reproducibility ± 1 nm / ± 0.5 nm
-
Safety and Compliance The detector has been certified to safety standards specified for Canada, Europe, and the United States. Refer to the instrument rear panel label and the Declaration of Conformity document for the current standards to which the instrument has been tested.
-
Flow Cells Refer to the VERITY 1741 UV-VIS User’s Guide and Technical Specifications Flyer for flow cell specifications
-
Maximum pressure for all flow cells is 2 MPa (290 psi, 20 bar)
-
Liquid Contact Materials FEP, fused silica, stainless steel, PEEK, KEL-F
-
Environmental Conditions Indoor use only
-
Altitude: up to 2000m
-
Temperature: 5°C–40°C
-
Humidity: maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C
-
Dimensions (W x H x D) 28.5 cm x 14.9 cm x 50 cm (11.2 x 5.9 x 19.7 in.)
-
Output 1 V/AU Four wavelength (channels) or scan with speed up to 20 Hz with step of 1 nm
-
Power Requirements Voltage: 100–240 V
-
AC Frequency: 50/60 Hz
-
Voltage Voltage fluctuations: up to ± 10% of nominal voltage
-
Overvoltage category I
-
Pollution degree 2
-
Weight 7.5 kg (16.5 lb.)
